rpcinterface_88143fd0c28d4b2b8fef8d882f6a9390_1_0

import "github.com/TheManticoreProject/Manticore/network/dcerpc/interfaces/88143fd0-c28d-4b2b-8fef-8d882f6a9390/1.0"

Package rpcinterface_88143fd0c28d4b2b8fef8d882f6a9390_1_0 is the descriptor for the TermSrvEnumeration RPC interface, abstract syntax 88143fd0-c28d-4b2b-8fef-8d882f6a9390 version 1.0 ([MS-TSTS]).

Generated by tools/idlgen (descriptor phase) from the IDL, then reviewed: the PipeName (from [MS-TSTS] 1.9) and the status-code table are not derivable from the IDL and were completed by hand.

Constants

Opnums for the on-the-wire methods. Opnums 7 are “not used on the wire” and are omitted.

const (
    OpnumRpcOpenEnum            uint16 = 0
    OpnumRpcCloseEnum           uint16 = 1
    OpnumRpcFilterByState       uint16 = 2
    OpnumRpcFilterByCallersName uint16 = 3
    OpnumRpcEnumAddFilter       uint16 = 4
    OpnumRpcGetEnumResult       uint16 = 5
    OpnumRpcFilterBySessionType uint16 = 6
    OpnumRpcGetSessionIds       uint16 = 8
    OpnumRpcGetEnumResultEx     uint16 = 9
    OpnumRpcGetAllSessions      uint16 = 10
    OpnumRpcGetAllSessionsEx    uint16 = 11
)

Status codes for this interface. Its methods return an HRESULT ([MS-ERREF] 2.1); success is S_OK (0x00000000). The values below are the common failures; StatusString falls back to the raw hex for any other value.

const (
    StatusSuccess  uint32 = 0x00000000 // S_OK
    E_ABORT        uint32 = 0x80004004
    E_FAIL         uint32 = 0x80004005
    E_OUTOFMEMORY  uint32 = 0x8007000e
    E_ACCESSDENIED uint32 = 0x80070005
    E_INVALIDARG   uint32 = 0x80070057
)

PipeName is the IPC$-relative named pipe for the TermSrvEnumeration interface. The endpoint is assigned in [MS-TSTS] section 1.9 (Standards Assignments).

const PipeName = `\LSM_API_service`

Variables

NameToOpnum is the reverse of OpnumToName, built at init so the two never drift.

var NameToOpnum = func() map[string]uint16 {
    m := make(map[string]uint16, len(OpnumToName))
    for op, name := range OpnumToName {
        m[name] = op
    }
    return m
}()

OpnumToName maps each on-the-wire opnum to its method name; the single source of truth.

var OpnumToName = map[uint16]string{
    OpnumRpcOpenEnum:            "RpcOpenEnum",
    OpnumRpcCloseEnum:           "RpcCloseEnum",
    OpnumRpcFilterByState:       "RpcFilterByState",
    OpnumRpcFilterByCallersName: "RpcFilterByCallersName",
    OpnumRpcEnumAddFilter:       "RpcEnumAddFilter",
    OpnumRpcGetEnumResult:       "RpcGetEnumResult",
    OpnumRpcFilterBySessionType: "RpcFilterBySessionType",
    OpnumRpcGetSessionIds:       "RpcGetSessionIds",
    OpnumRpcGetEnumResultEx:     "RpcGetEnumResultEx",
    OpnumRpcGetAllSessions:      "RpcGetAllSessions",
    OpnumRpcGetAllSessionsEx:    "RpcGetAllSessionsEx",
}

func StatusString

func StatusString(status uint32) string

StatusString returns a mnemonic for the documented status codes, otherwise the hex value.

func SyntaxID

func SyntaxID() syntax.SyntaxID

SyntaxID returns the TermSrvEnumeration abstract syntax identifier: 88143fd0-c28d-4b2b-8fef-8d882f6a9390, version 1.0.